![]() ![]() Tip: If more than one grid lines are already aligned with each other, a small lock sign will be displayed.All Vertical Grids are added in the project.Using the Pick Lines and Offset method shown in step 9, add Grids C to M with specified distances as shown in Fig 1.However, if you change the value of the grid after it is placed, other already placed grids do not change their value automatically. Note that the Grid has automatically taken the name “B”. In Revit, Grid numbers are given automatically based on the last number of the Grid that you have specified.The length of the Grid line is exactly the same as the Grid A as we have used offset tool. The direction will be indicated with a dashed blue reference line showing the position where offset will be placed. Similarly, hover your mouse slightly towards left to guide Revit to offset towards left side. TIP: Hover slightly towards right of Grid A to guide Revit to offset towards right side.Click if the position shown by the reference line is correct. Revit will show you a dashed blue reference line where the offset will be placed. On the options bar, specify offset value as 3.61m.Click Modify | Place Grid tab -> Draw panel -> Select Pick Lines tool.The best way to create this Grid is to offset Grid A at the specified distance. Grid B is located at 3.61m away from Grid A. Now, let’s create Grid B as shown in Fig 1.Click and drag the node symbol of the Grid A and extend the grid line away from the site boundary lines. Clicking and dragging these nodes, you can extend the Grid lines. While the Grid line is selected, you may notice the two node like circles at both start and end point.Alternatively, go to properties of the Grid line and in the Instance parameter Name, change the value from 1 to A. In the Grid symbol, click on the text to change the Grid name from 1 to A.Click to enter Grid end point where you want the Grid line to end. Click the start point of the Grid at the top left intersection of the site boundary lines in the project.Grid A is located at the left vertical boundary line of the site. Let’s start by drawing Grid A as shown in Fig 1.Click Modify | Place Grid tab -> Draw panel -> Select a straight line option.Alternatively, use “GR”as the keyboard shortcut.Go to Architecture tab -> Datum panel -> Grid. ![]() ![]() From the Project Browser, navigate to the Floor plan view named “00 Ground Level”.This project file already contains the site boundary line created in previous chapter Sketch Lines. Open the tutorial file TutorialGrids_Input_LearningRevitOnline.rvt in Revit. ![]() Grids for the tutorial sample project Solution: Sample File required for this tutorial: “TutorialGrids_Input_LearningRevitOnline.rvt” (If you do not have this file, please download it from here.) Fig 1.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |